GE JGRP17 Owner's Manual page 12

Built-in gas
Hide thumbs Also See for JGRP17:
Table of Contents

Advertisement

USING YOUR OVEN
(continued)
Shelf Positions
The oven has 4 shelf supports, identified in this
illustration as A (bottom), B, C and D (top).
Shelf positions for cooking are suggested in the
Baking, Roasting and Broiling sections.
Oven Moisture
As your oven heats up, the changing temperature of the air in the oven may
cause water droplets to form on the door glass. These droplets are harmless
and will evaporate as the oven continues to heat up.
BAKING
Your oven temperature is controlled very accurately
using an oven control system. It is recommended
that
you operate the oven for a number of weeks to
become familiar with your new oven's performance.
If you think an adjustment is necessary, see the Adjust
the Oven Thermostat section. It lists easy Do It
Yourself instructions on how to adjust the thermostat.
How to Set Your Oven for Baking
To avoid possible burns, place the shelves in the
correct position before you turn the oven on.
_-_
1. Press BAKE.
t//_
2. Press the TEMP + or- pads to set the
oven temperature.
®
3. Press START. When the oven starts to
heat the changing temperature will be in
the display. (The display starts changing
once the temperature
reaches 100°F.)
4. Press CLEAR/OFF
when the baking
is finished.
NOTE: A cooling fan may automatically
turn on and
offto cool internal parts. This is normal, and the fan
may continue to run even after the oven is turned off.
To change the oven temperature
during the
Bake cycle, press the BAKE pad and set the
new temperature.
12

Advertisement

Table of Contents
loading

Table of Contents