Craftsman 358.798470 Operator's Manual page 27

ill|mr • I iji L i|111 i
SERVICE AND ADJUSTMENTS
• • ,, . , • . , ...m ,..., , ..
LINE SAVER
CATCH
Figure 38
\
TAP BUTTON
Figure 39
INSTALLING NEW LINE ON SPOOL (Fig. 40)
NOTE: The line must be wrapped firmly and evenly for
properline feed.
• Follow"INSTALLING PRE-WOUND SPOOL" steps and
remove any line remaining on the spool.
. Use a 40 foot lengthof SEARS •080" diametertine.
• Insert about 1/8 inch of the end of the line through the
hole in the inner rim of the spool. Allow no more than
1/8 inchof fine to extend beyond the rim to avoidinter-
ference with tapping action.
• Wrap the line on the spool as shown by the arrow.
• Follow =INSTALLING PRE-WOUND SPOOL" to com-
plete assembly.
FOR BEST RESULTS, USE ONLY .080"
SEARS
BRAND LINE.
WRAP LINE ON
SPOOL AS
SHOWN BY ARROW
LINE
Figure 40
- 27 -