Warning Displays - FujiFilm FINEPIX F40fd Owner's Manual

Warning Displays
CARDERROR
• The Memory Card contact area is soiled,
• The Memory Card format is incorrect.
• Camera fault,
• The Memory Card is damaged,
• Inserted Memory Card is not compatible with your
camera.
The internal memory or Memory Card is full.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (*p,113). If the message still
appears, replace the Memory Card.
• Contact your FUJIFILM dealer.
• Insert a compatible Memory Card that is
operationchecked at FUJIFILM Corporation,
[_ CARD FULL Erase some images in internal memory or Memory
Card (*p.43), or use a Memory Card that has ample
I_1 CARD FULL free space.
• The data could not be recorded due to a Memory * Re-insert the Memory Card or turn the camera off
Card error or a connection error between the and then on again. If the message still appears,
Memory Card and camera, contact your FUJIFILM dealer.
WRITE ERROR • The image cannot be recorded as it is too large to • Use a new Memory Card.
fit in the available space on the Memory Card.
• The Memory Card or internal memory is not • Format the Memory Card or internal memory on
formatted, the camera (.p.113).
The SD Memory Card switch is slide to the "Lock" Unlock the protection by sliding it back (*p,20).
PROTECTED CARD
side.
INTERNAL MEMORY IS The data could not be recorded or copied since the Erase some images from the internal memory
FULL internal memory is full. (_p,43), or use a Memory Card that has ample free
space.
INSERT A NEW CARD
BUSY The timing for recording was incorrect because the Use an Memory Card that was formatted on the
Memory Card was formatted on a PC. camera.
The frame number has reached 999-9999. ,._1 Insert a formatted Memory Card into the camera.
_2",Set RENEW as the FRAME NO. setting in the
[] SET-UP menu (_p.110).
FRAME NO. FULL ,_3_Start taking pictures (The frame number starts
from "100-0001").
_4 Set CONT. as the FRAME NO. setting in the []
SET-UP menu.
144