Setting The Clock - Frigidaire FPGS3085KFA Use & Care Manual

MINIMUM AND MAXIMUM CONTROL PAD SETTINGS
All of the features listed below have minimum and maximum time or temperature settings that may be entered into the
control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven
Lockout pad is delayed 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature.
FEATURE MINIMUM TEMP. ITIM_ MAXIMUM TEMP. /TIME
PREHEAT
550°F/288°C
BAKE
170°F/77°C 550°F/288°C
BROIL 400°F/2050C 5500F/288°C
CONVECTION BAKE 300°F/149°C 550°F/288°C
CONVECTION ROAST
300°F/149°C 550OF/288°C
PIZZA 300°F/149°C 550°F/288°C
CHICKEN NUGGETS 300OF/149°C 550OF/288°C
TIMER 12 Hr.Mode 0:01 Min. 11:59 Hr./Min.
24Hr. Mode 0:01 Min, Hr./Min:
CLOCK TIME 12 Hr. Mode 1:00 Hr./Min. 12:59 Hr./Min.
Hr. Mode 0:00 Hr./Min: 23:59 Hr.iMin:
DELAY START 12 Hr. Mode 1:00 Hr./Min. 12:59 Hr./Min. :
24Hr. Mode 0:00 Hr.iMin: 23:59 Hr./Min,
BAKE TIME 12 Hr. Mode 0:01 Min. 5:59 Hr./Min.
24 Hr. MOde 0:01 5:59 Hr.iMin:
SETTING
THE CLOCK
The SET CLOCK pad is usedtosettheclock. T he clock may
be setfor12 or 24 hour time of day operation. The clock
has been presetat the factory forthe 12 hour operation.
When the range isfirst p lugged in,or when the power
supplyto the range has been interrupted, thetimerinthe
display will flash.
To set the clock (example below for 1:30)
1. Press SET CLOCK. "CLO" will appear in the display.
2. Press 1 3 O pads to set the time of day to 1:30. "CLO"
will stay in the display.
3. Press START. "CLO" will disappear and the clock will
start.
CHANGING BETWEEN 12 OR 24 HOURTIME
OF DAY DISPLAY
1. Pressand holdSET CLOCK for6 seconds. "CLO" will
appear inthedisplay.
2. CONTINUEholdingthe pad until"12HrdAY"or"24Nr
dAY" appears in the display and the control beeps
once.
3. Press SELF CLEAN to switch between the 12 and 24
hour time of day display. The display will show either
"12Nr dAY" or"24Nr dAY".
4. Press START toaccept thechangeor press CANCEL to
reject thechange.
5. Reset thecorrect t imeas described i nTo setthe Clock
above.Please notethatif the24 hourtimeofday mode
was chosen,the dock will now display t imefrom 0:00
through23:59 hours.