Advertisement
Choose a Self=Clean Cycle Time
Determine w hichSelf-Clean C ycle timeasrequired. Yourappliance c omes withtwochoices; _
(Speed Clean) f ora 2
hourSelf-Clean c ycle(for
lighter soils) or _
(Clean) for a 3 hour cycle (for heavier soils). To set for Self-Clean follow the
instructions provided below. PLEASE NOTE: The kitchen area should be well ventilated using an open window, ventitlation
fan or exhaust hood during the 1st Self-Clean cycle. This will help eliminate the normal odors associated with the 1st Self-
Clean cycle.
To Set the Controls
for a Self=Clean
Cycle
or a Delayed
Start Self=Clean
Cycle:
(Note: if you do not want to start a Delayed Self-Clean Cycle, skip steps 2 & 3.)
1.
Be sure the clock shows the correct time of day.
2.
Press @.
The " : " in the time of day will flash.
3.
Press and hold the/_
pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the desired
time is displayed.
4 Press Ifor2hour S elf-Clean
time) o r
Ifor3hour S elf-Clean
time).
5.
Press the ,/_ or V
pad. The time selected in step 4 above should appear in the display.
As soon as the controls are set, the motor driven lock will begin to close automatically and the" DOOR LOCKED"
indicator light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven
door to lock).
6.
"CLn" will appear in the display during the Self-Clean cycle and the "DOOR LOCKED" light will glow until the Self-
Cleaning cycle is complete or cancelled and the oven temperature has cooled.
When the Self-Clean
Cycle has Completed:
1.
The time of day _r''End''wi__appearinthedisp_aywind_wandthe"C_ean__and''D__RL_CKED''_ightwi__c_ntinuet_
glow.
2.
Once the oven has cooled down for about 1 HOUR and the "DOOR LOCKED" light has gone out, the oven door can be
opened.
3.
If "End" is in the display and the Clean indicator light remains ON, press @.
The time of day will appear in the
display.
NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.
Stopping
or interrupting
a Self-Cleaning
Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning cycle:
1.
Press _/_.
2.
Once the oven has cooled down for about 1 HOUR and the "DOOR LOCKED" light has gone out, the oven door can be
opened.
3.
Restart the Self-Clean cycle once all conditions have been corrected.
To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of
the oven when opening the door to allow hot air or steam to escape.
DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid
possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.
15
Advertisement
