Setting Oven Controls - Frigidaire PLEFMZ99GCB Use & Care Manual

Setting Oven controls
Setting Continuous Bake or 12 Hour Energy Saving
The TIMER ON/OFF _ and CLEAN _ pads control the Continuous Bake or 12 Hour Energy Saving features. The oven
control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for
more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.
INSTRUCTIONS PRESS DISPLAY
To set the control for Continuous Bake or 12 Hour
Energy Saving features:
1. Press and hold _ for 6 seconds (Fig.l)
2. Press _ to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12 h" (Fig. 2) in the display
indicates the control is set for 12 Hour Energy Saving feature
and "=- h" (Fig. 3) indicates the control is set for the Continuous
Bakefeature.
3. Press t to accept the change (Fig. 4) display will return to
time of day) or press _ to reject the change.
Setting Kitchen Timer
_for 6 seconds
or©
Fig. 1
Fig. 2
Fig. 3
Fig. 4
The TIMER ON/OFF _ pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen
that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used
during any of the other oven control functions. Refer to "Minumum & Maximum Control Pad Settings" on page 14 for
time amount settings.
INSTRUCTIONS PRESS DISPLAY
To set the Kitchen Timer (example for 5 minutes):
1. Press _. (Fig. 5).
,
,
Press the number pads to set the desired time in the display
(example _5_ ). Press q . (Fig. 6).
Note: If t is not pressed the timer will return to the time of
day.
When the set time has run out, "End" and "TIMER" will show in
the display (Fig. 7). The clock will sound with 3 beeps every 15
seconds until _ is pressed.
®
To cancel the Kitchen Timer before the set time has
run out:
Press _. The display will return to the time of day.
®
16
Fig. 5
Fig. 6
Fig. 7