KNOWYOURHAMMERDRILL
See Figure 1.
Before attempting to use any tool, familiarize yourself
with all operating features and safety requirements.
ELECTRICAL
CONNECTION
Your hammer ddll has a precision built electric motor.
It should be connected to a power supply that Is 120
volta, 60 Hz, AC only (normal household current).
Do not operate this tool on direct current (DC). A
substantial voltage drop will cause a loss of power
and the motor will overheat. If your hammer drill does
not operate when plugged into an outlet, double-
check the power supply.
AUXILIARY
HANDLE
An auxiliary handle has been packed with your ddll for
ease of operation and to help prevent loss of control.
DEPTHGAGEROD
DEPTH GAGE
ROD
A depth gage rod has been packed with your hammer
ddll to assist you in controllingthe depth of drilled
holes.
APPLICATIONS
(Use only for the purposes listed below)
•
Hammer drilling in concrete and masonry.
•
Drilling in wood.
•
Drilling in ceramics, plastics, fiberglass, and
laminates.
•
Drilling in both hard and soft metals.
•
Using driving accessories, such as driving screws
with screwdriver bits.
•
Mixing paints.
WING
KEYLESS
SCREW
CHUCK
HAMMER
ADJUSTMENT
MODE
KNOB
LOCK-ON
VARIA
CONTROLSELECTOR
SWITCHTRIGGER
DRILLING
MODE
Fig. 1
_1,
WARNING:
Do not allow familiarity with tools to make you careless. Remember that a careless fraction of
a second is sufficient to inflict severe injury.
7