Oven Controls Functions; Setting Oven Controls; Setting The Clock; Changing Oven Temperature Display (P Or C°) - Frigidaire FFEF3018LQA Use & Care Manual

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become familiar with the various pad features and functions of the oven as described below.
Feature indicator Bake time pad-- Use Up and down arrow pads-- Use with the
lights-- These to enter the length of feature or function pads to set oven Bake pad--Use
indicator lights show baking time desired, temperature, bake time, start time, clean time to select the bake
which feature is active. \ (when programming an automatic start time), feature.
\ setting or adjusting the clock and minute timer. /
oven
timer ........start V ......... dear ...... dean ......
on-off time off _:
Timer on-off pad-- preheat
Use to set or cancel
door ocked
the minute timer. The
minute timer does not
start or stop cooking.
Timer
on=off
pad is
used to set the Start time pad-- Oven, preheat & door locked lights* -- The "oven" light
continuous bake
function.
Use to set the
desired start time
for baking & Self-
Clean. May be used
with bake time to
program a delayed
timed bake.
will glow each time the oven turns on to maintain the set oven
temperature. The "preheat" light will glow when the oven is
first set to operate, or if the desired temperature is reset higher
than the actual oven temperature. The "door locked" light will
flash when the oven door locks and unlocks, the oven door
lockout is active or when the self-clean cycle feature is active.
Clean pad-- Use to set a
Self-Clean cycle.
Clear off pad-- Use to
clear any feature
previously entered except
the time of day and
minute timer. Press clear
off to stop cooking.
Also use clear off to
activate oven lockout
feature.
Setting the clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash "12:00". It _srecommended to always set the
clock for the correct time of day before using the appliance.
To set the clock:
Changing temperature display (°F or °C)
The electronic oven control is set to display °F (Fahrenheit)
when shipped from the factory. The oven may be
programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
1. Press clock once (do not hold key pad down).
2. Within 5 seconds, press and hold the A or V until
the correct time of day appears in the display.
The clock cannot be changed when the oven is set for
cooking
or clean is active.
The temperature display feature cannot be changed
when the oven is set for cooking or clean is active.
To change the temperature to display °C (Celsius) or
from °C to °F:
1. Press broil. "----" appears in the display.
2. Press and hold the A until "HI" appears in the
display.
3. Press and hold broil until °F or °C appears in the
display.
4. Press the A or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating
mode.