Table of Contents
Advertisement
•
Store
idle power
tools out of the reach
of children
and do not allow
persons
unfamiliar
with the power tool or these instructions
to operate
the power tool. Power tools are dangerous
in the hands of untrained
users.
Maintain
power
tools.
Check
for misalignment
or binding
of moving
parts, breakage
of parts
and any other condition
that may affect
the
power tool's operation.
If damaged,
have the power tool repaired
before
use. Many accidents
are caused by poorly maintained
power tools.
•
Keep cutting tools sharp and clean. Properly maintained
cutting
tools with
sharp cutting
edges are less likely to bind and are easier to control.
Use the power tool,
accessories,
blades,
etc. in accordance
with these
instructions
and in the manner
intended
for the particular
type
of
power
tool, taking
into account
the working
conditions
and the work
to be performed.
Use of the power tool for operations
different
from those
intended could result in a hazardous
situation.
_,
WARNING:
When using power tools, basic safety precautions
should always
be followed
to reduce the risk of fire, electric
shock, and personal injury.
_,
WARNING:
The operation
of any tool can result in foreign objects
being
propelled
into your eyes, resulting
in severe eye damage. When operating
a
power tool, always wear safety goggles or safety glasses with side shields and a
full face shield when needed.
A_, WARNING:
If any parts are missing, do not operate the tool until the missing
parts have been replaced.
Doing so could result in serious personal injury.
SERVICE SAFETY
•
Have your power
tool serviced
by a qualified
repair person
using only
identical
replacement
parts. This will ensure that the safety of the power
tool is maintained.
If any part of this Impact Wrench
is missing or should break, bend, or fail
in any way, or should any electrical
component
fail to perform
properly:
shut
off the power switch
and remove the Impact
Wrench
plug from the power
source
and have the missing,
damaged,
or failed
parts
replaced
before
resuming
operation.
Tool service
must be performed
only at a Sears Parts & Repair Service
Center.
Service or maintenance
performed
by unqualified
personnel
could
result in a risk of injury.
Use only identical
replacement
parts when servicing a tool. Follow
the instructions
in the Maintenance
section of this manual. Use of
unauthorized parts or failure to follow maintenance instructions may create a
risk of electric shock or injury.
27990
ManuaLRevised_lO
1202
Page 7
Hide quick links:
Advertisement
Table of Contents
