Table of Contents
Advertisement
Available languages
Available languages
Caring
for your
Aerosmart
dryer
Clean your dryer with a soft damp cloth and wipe dry. Do not use scouring cleaners as they can
damage the paint and plastic surfaces.
Removing the Lid
You can remove the lid for cleaning. Open the lid fully, hold one side
with one hand and tap the other side with an upwards
motion. To
replace the lid, hold the lid vertically
and align both hinges before
clicking
back into place.
Pre-Treatment Sprays
Fig,48 Removing the lid
Do not use pre-treatment
sprays or liquids on or near your dryer as they can damage your
machine's control
panel as well as any of its plastic parts. Damage to your dryer caused by pre-
treatment
products will not be covered by your warranty.
Stains
If stains appear inside the drum of your machine, mix a detergent
and water paste (or use a non-
flammable
liquid cleaner) and wipe over the stain with a soft cloth. Then tumble
old towels for
20 - 40 minutes on the AIR DRY setting to remove all traces of the cleaner.
Lint Bucket
The lint bucket will need to be emptied
before the lint reaches the top of the transparent
section. A lint bucket that is not full ensures your clothes will remain lint-free and your dryer will
operate at maximum
efficiency.
Inspect and clean all ducting
at least once a year to remove accumulated
lint. Check frequently
that any damper on the exhaust
hood moves sufficiently
and opens and shuts freely.
Ensure that the area around the dryer is kept clear and free from combustible
materials, gasoline
and other flammable
vapors or liquids. Ensure also that the dyer area is kept clear and free from
items that would obstruct
the flow of combustion
and ventilation
air.
Advertisement
Table of Contents
