Craftsman 358.351210 Operator's Manual page 6

KNOW Y OUR S AW
READ THIS O PERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your u nit t ofamiliarize yourself with the
location ofthe various controls and adjustments. Save t his manual forfuture r ef-
erence.
Front Handle
Chain Adjustment _ \.
Hand Guard _|l
Chain Adjusting _
X_ Screw _J,.._
_, ,
Fill Cap
Starter Rope ON_ShTOP
,x.
Starter Housing
Fuel Mix Fill Cap
Throttle
RearL°C_ ut
Handle
Cytinder Cover
Adjusting
Direction
of Chain
Travel
Trigger
Choke Knob Bar Clamp
Bar Clamp Nuts Guide Bar
ON/STOP SWITCH
The ON/STOP SWITCH is used to stop
the engine.
THROTTLE TRIGGER
The THROTFLE TRIGGER controls en-
gine speed.
THROTTLE LOCK-OUT
The THROTI-LE LOCK-OUT must be
pressed before you can squeeze the
throttle trigger. This feature prevents
you from accidentally squeezing the
trigger.
CHOKE/FAST IDLE LEVER
The choke and fast idle speed are set
by pulling the CHOKE/FAST iDLE LEVER
out fully for cold or for refueled starting.
The choke provides additional fuel
when starting a cold engine.
CHAIN TENSION
It is normal for a new chain to stretch
during first 30 minutes of operation.
You should check your chain tension
frequently. See CHAIN TENSION in the
MAINTENANCE section.