Craftsman 358.351210 Operator's Manual page 5

• Low Kickback Chain, has met kick-
back performance requirements
when tested on a representative
sample of chain saws below 3.8 cu-
bic inch displacement specified in
ANSI B175.1.
Low-Kickback Chain
Contoured Depth Gauge
,_1_-.,_,_ Etongated Guard Link
_ Deflects Kickback Force
_X_ _ And Allows Wood To
• _ Gradually Ride Into Cutter
Chain With High Kickback Potential
_._ Can Obstruct Material
SAFETY NOTICE: Exposure to vibra-
tions through prolonged use of gaso-
line powered hand tools could cause
blood vessel or nerve damage in the
fingers, hands, and joints of people
prone to circulation disorders or
abnormal swelling. Prolonged use in
cold weather has been linked to blood
vessel damage in otherwise healthy
people. If symptoms occur such as
numbness, pain, loss of strength,
change in skin color or texture, or loss
of feeling in the fingers, hands, or
joints, discontinue the use of this tool
and seek medical attention. An anti-vi-
bration system does not guarantee the
avoidance of these problems. Users
who operate power tools on a continu-
al and regular basis must closely
monitor their physical condition and
the condition of this tool.
CHAIN BRAKE: If this saw is to be
used for commercial logging, you must
order and install a chain brake to com-
ply with Federal OSHA Regulations for
Commercial Logging. Contact your
Sears Service Center or call
1-800-235-5878.
SPARK ARRESTOR: Your saw is
equipped with a temperature limiting
muffler and spark arresting screen which
meets the requirements of California
Codes 4442 and 4443. All U.S. forest
land and the states of California, idaho,
Maine, Minnesota, New Jersey, Oregon,
and Washington require by law that
many internal combustion engines be
equipped with a spark arrestor screen. If
you operate a chain saw in a state or
locale where such regulations exist, you
are legally responsible for maintaining
the operating condition of these parts.
Failure to do so is a violation of the law.
Refer to MAINTENANCE section.
STANDARDS: This chain saw is listed
by Underwriters Laboratories, Inc. in
accordance with American National
Standards for Gasoline-Powered
Chain Saws Safety Requirements
(ANSi B175.1-1991 ).
41_ WARNING: Before using chain
saw, ensure all fasteners are secure.
CARTON CONTENTS
Check carton contents against the fol-
lowing list.
Model 358.351210
• Chain Saw (fully assembled)
• Chain adjustment tool
• 2-cycle engine oil. (Bar oil not
included)
• Extra Chain
• Carrying case
Examine parts for damage. Do not use
damaged parts.
If you need assistance or find parts
missing or damaged, please call
1-800-235-5878.
NOTE: It is normal to hear the fuel filter
rattle in an empty fuel tank.
Your unit has been factory tested and
the carburetor precisely adjusted. As a
result you may smell gasoline or find a
drop of oil/fuel residue on the muffler
when you unpack the unit.
ASSEMBLY
Your saw is fully assembled; no as-
sembly is necessary.