Identify Parts; How To Assemble; Attach Handle - Eureka 420 Series Owner's Manual

IDENTIFY PARTS

HOW TO ASSEMBLE

Assemble completely before using.
1. Attaching or Removing Floor Nozzle.
Attach fl oor nozzle to the bottom of cleaner by inserting
the "T" joint of the fl oor nozzle onto the receiving tube on
the main body until it clicks. Push the lock button onto
the receiving tube when attaching the fl oor nozzle.
2. Attach Handle Grip.
Align the lock button on the handle tube with the hole in
the handle grip. Push the lock button and slide the handle
into place

3. Attach handle.

Push handle into top of cleaner. Insert end with guide
tabs into the cleaner. Push handle release button to get
the handle tube fully inserted. Handle is properly inserted
when you hear a click from the handle release button.
Handle Grip
Cord Retainer
Lock Button
Handle Tube
On/Off Switch
Dust Cup Filter
Dust Cup
Lock Button
Handle Release
Button
Telescoping
Handle
5
Release
Cord Hooks
4
4. Store Cord (using cord hooks).
Pull the electrical cord down around the lower cord hook,
then wrap cord around upper and lower cord hooks. Fasten
plug to electrical cord to prevent unwinding.
5. Store Unit.
Push telescoping handle release button to lower handle
into compact storage position; ensuring the handle is
locked.
2
3
1
3