Usin 9 Your Water Dispenser - Fisher & Paykel E402B Installation Instructions And User Manual

Using your wate dispense
Dispensing pad
Your water dispenser has been designed for one handed operation. Simply push your glass
up against the dispenser pad found at the back of the dispenser area. This pad requires only a
gentle press to activate.
Please remember that pressing very hard against the dispensing pad wi[[ not make the dispenser
operate faster or produce greater quantities of water.
First use
After installation, on the first use, allow approximately a one minute delay from when the
dispensing pad is pushed until water is dispensed. This w[[[ allow the tank to fi[[ completely.
o The _ symbol wi[[ flash while the water reservoir fi[[s up. Once the reservoir is fuji, the symbol
wi[[ stop flashing.
After you fi[[ the tank for the first time, dispense and discard approximately 3 L or 3 qt to flush
the tank out.
$
÷
Dispensing
Unless Measured Fi[[ is selected, water wi[[ be dispensed in
free-flow mode. (For more information on Measured Fi[[ refer
to page 13).
To dispense water push the dispensing pad gently, using a
glass or container.
When you dispense water, a light wi[[ appear above the
dispensing area, and on the display screen. The water fi[[
t, .
icon _ wl[[ also appear.
To stop the flow of water, simply pu[[ your glass away from
the dispensing pad.
0 o 0 0
Fig.10 Worerdispenser
/mportand
To avoid damage to property or personal injury do not put hands, fingers or objects up the
dispenser opening.