Equipment Problems; Glossary - Craftsman 919.152145 Owner's Manual

ModeB No. 919.152145
Running HP 1
Bore 47.625
Stroke 31.75
Voltage-Single Phase 120V
Minimum Branch Circuit Requirement 10 amps
Fuse Type Time Delay
Air Tank Capacity 4
Approx. Cut-In 120
Approx. Cut-out 150
SCFM @ 40 psig 3.7
SCFM @ 90 psig 2.6
Refer to Glossary for abbreviations.
This manual contains information that is important for you to know and
understand. This information relates to protecting YOUR SAFETY and
PREVENTING EQUIPMENT PROBLEMS. To hetp you recognize this
information, we use the symbols below. PIease read the manual and pay
attention to these symbols.
situation which, if not avoided, will result
in death or serious iniury.
Indicates a potentially
i hazardous situation
which, if not avoided, could result in
death or serious in'ULUEy.
_ Indicates a potentially
hazardous situation
which, if not avoided, _ result in minor
or moderate ini_
_Used without the
safety alert symbol
indicates a potentially hazardous situation
which, if not avoided, may result in
re err dama e.
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known (to the State of Camifornia) to cause cancer, birth defects
or other reproductive harm. Some exampme of these chemicals are:
lead from lead-based paints
crystalline silica from bricks and cement and other masonry products
arsenic and chromium from chemicaBly-treated Bumber
Your risk from these exposures varies, depending on how often you do
this type of work. To reduce your exposure to these chemicals: work in
a wemlventilated area, and work with approved safety equipment, atways
wear MSNA/NIOSN approved, proper_y fitting face mask or respirator when
using such tooms.
When using air tools, basic safety precautions shoumd a_ways be followed
to reduce the risk of of personal injury.
3-ENG A10282