Grounding Instructions - Craftsman 919.152145 Owner's Manual

iiiiiii ....
1. Remove unit from carton and discard all packaging.
HOW TO SET UP YOUR UNmT
Location of the Air Compressor
® Locate the air compressor in a
clean, dry and well ventilated
area.
* The air compressor should be
located at least 12" away from
the wall or other obstructions that
will interfere with the flow of air=
® The air compressor pump and
shroud are designed to allow for
proper cooling. The ventilation
openings on the compressor are
necessary to maintain proper
operating temperature. Do not
place rags or other containers on
or near these openings.
GROUNDING INSTRUCTIONS
event of a short circuit, grounding
reduces the risk of shock by
providing an escape wire for
the e_ectric current. This air
compressor must be propermy
grounded,
The portable air compressor is
equipped with a cord having a
grounding wire with an appropriate
grounding plug (see following
illustrations).
1. The cord set and plug with this
unit contains a grounding pin.
This plug MUST be used with a
grounded outlet.
IMPORTANT: The outlet being used
must be installed and grounded in
accordance with all local codes and
ordinances.
2. Make sure the outlet being used
has the same configuration as the
grounded plug. DO NOT USE AN
ADAPTER. See illustration.
3. inspect the plug and cord before
each use. Do not use if there are
signs of damage.
Plug
4. if these grounding instructions
are not completely understood,
or if in doubt as to whether the
compressor is properly grounded,
have the installation checked by
a qualified electrician.
Risk of
EmectricaB Shock,
IMPROPER GROUNDING CAN
RESULT IN ELECTRICAL SHOCK,
Do not modify the pmug provided, If
it does not fit the avaimabmeouttet, a
correct outmet should be installed by
a quaBified emectrician,
Repairs to the cord set or pBug
MUST be made by a quaBified
emectrician,
A10282 10 - ENG