Craftsman 315.275110 Owner's Manual page 7

FEATURES
REAR VIEW OF ROUTER
DEPTH CONTROL KNOB
VARIABLE SPEED
CONTROL SELECTOR
POWER CORD
"LOCK-ON"
BUTTON
LOCK
HANDLE
"ON-OFF'
TRIGGER
SWITCH HANDLE
SPEED
SELECTION CHART
5/16-18 UNC-2B
ROUTER BASE
FLANGE
PLUNGE
.OCK
ACTUATOR
SUBBASE
COLLETNUT
Fig. 2
ELECTRICAL CONNECTION
Your muter has a precision built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only
(normal household current). Do not operate this toolon direct current (DC). A voltage drop of more than 10 percent willcause
a loss of power and the motor will overheat. If you r tool does not operate when plugged into an outlet, double-check the power
supply.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with
side shields, available at Sears Retail Stores.
10orv_ "7