Eureka 2270 Series Owner's Manual page 11

How To Replace Bags–Style J
NOTE: Turn off the switch and unplug the electrical cord before changing dust bag. Never operate the vacuum
cleaner without the dust bag or the filter.
It may be more convenient to lower the handle to the floor before changing the bag.
To Remove Bag:
A. Remove front cover. Press down on front cover latch
and lift cover away from cleaner.
To Replace New Bag:
C. Align bag inlet hole and inlet tube. Push bag straight
onto tube.
D. Tuck bag into bottom and along sides.
E. Replace front cover. Make sure disposable bag does
not catch under front cover. Place the tabs on the
bottom of the front cover into slots at bottom of bag
compartment and press cover against unit until it clicks
shut.
* We recommend using only Genuine Eureka
Bags, Part No. 61515.
Front
Cover
Latch
Bag
Collar
B. Grasp bag collar and pull straight out of bag
compartment. Dispose of used bag.
11