Advertisement
TRIGGER SWITCH (Fig. 7)
To turn the drill ON, depress the switch trigger,
To turn it OFF, release the trigger.
VARIABLE SPEED (Fig, 7)
The variable speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure.
DIRECTION
OF ROTATION SELECTOR
(FORWARD!REVERSE!CENTER
LOCK) (Fig. 7)
The direction of bit rotation is reversible and
is controlled by a selector located above the
trigger switch,
With the drill held in normal operating position:
[] Position the direction of rotation selector to
the left of the tool for drilling.
[] Position the direction of rotation selector to
the right of the tool for reverse°
[] Setting the switch in the OFF (center lock)
position helps reduce the possibility of
accidental starting when net in use,
Fig, 7
Direction
of rotation
selector
Variable
speed
trigger
switch
I
_CAUTBOit,
a: To prevent gear damage, always allow the chuck to come to complete
stop before changing the direction of rotation,
J
NOTE: The drill will not run unless the direction of rotation selector is engaged fully to ]
the left or right.
!
ELECTRIC BRAKE
To stop the drill, release the trigger switch and allow the chuck to come to a complete stop. The
electric brake quickly stops the chuck from rotating. This feature engages automatically
when you
release the trigger switch,,
RATCHETING
KEYLESS CHUCK (Fig 8)
The drill has a ratcheting keyless chuck to
tighten or release drill bits in the chuck jaws.
The arrows on the chuck indicate which
direction to rotate the chuck body in order to
GRIP (tighten) or OPEN (release) the chuck
jaws on the drill bit. The ratcheting feature is
designed to prevent the chuck from opening
during operation,
,_kWARNIING:
Do not hold the chuck
body with one hand and use the power
of the drill to tighten the chuck jaws on
the drill bit. The chuck body could slip
in your hand, or your hand could slip
and come in contact with the rotating
bit° This could cause an accident
resulting in serious personal injury.
Fig, 8
OPEN
Ratcheting
release)
keyless
Chuck
chuck
jaws
Chuck
1
GRIP
(tighten)
16
Advertisement
