Mg 1000B Platform Configuration Overview - Nortel 1000 Branch of?ce Installation And Commissioning Manual

44 Overview
Multi Server (CP-P4) Port Network Configuration (Dual-homing -
Distributed), shows a configuration with a Call Server platform that does not
reside in a MG 1000B cabinet and chassis; therefore no direct connection
exists to the MGC. The CP-P4 call server does not use the MGC dual
homing feature to increase the system reliability
Figure 10
Multi server (CP-P4) port network configuration (dual-homing - distributed)
MG 1000B platform configuration overview
In each MG 1000B Core, one CP PM and MGC is required. The three
remaining slots (nine in an MG 1000B Cabinet) can contain analog line
cards, analog trunk cards, digital line cards, or digital trunk cards. Refer to
Table 3 "Card slots for MG 1000B Core and MG 1000B Expander" (page
32)
Each MG 1000B Core with a digital trunk card must have a clock controller.
See Circuit Card Reference(NN43001-311)
For further information on line side T1 and line side E1 cards, refer to
There are two configurations for the MG 1000B platform:
•
•
Copyright © 2007, Nortel Networks
.
for a summary of the allowable card slots.
without an MG 1000B Expander
with an MG 1000B Expander
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007