KitchenAid KUIS155HLS0 Use & Care Manual page 10

To reverse the hinges:
1. Unscrew and remove the top hinge. Replace the
screws in the empty hinge holes.
2. Remove the screws from the bottom of the opposite
side of the ice maker cabinet. Turn the top hinge upside
down so that the hinge pin points up. Place the hinge
on the bottom opposite side of the ice maker and
tighten screws.
3. Remove the plastic hinge pin sleeve from the "old"
bottom hinge and replace it on the new bottom hinge
pin.
4. Remove the "old" bottom hinge screws and hinge.
Replace the screws in the empty hinge holes.
5. Remove the screws from the top of the opposite side of
the ice maker cabinet. Turn the hinge upside down so
that the hinge pin points down. Place the hinge on the
top opposite side of the ice maker and tighten the
screws.
6. Remove the top hinge pin.
To replace door on hinges:
1. Place plastic hinge pin sleeve in the top hinge hole on
the door. Align the door with the top hinge hole and
replace the top hinge pin.
2. Replace the handle and handle screws.
Top Hinge
1. Hinge Pin
2. Hinge Pin Sleeve
3. Hinge
4. Hex Head Hinge Screw
10
Bottom Hinge
1. Hex Head Hinge Screw
2. Hinge Pin Sleeve
3. Hinge
4. Hinge Pin
To reverse the door catch:
1. Remove the hole plugs from the opposite side of the
door and set aside.
2. Remove the screws from the magnetic door catch and
replace it on the opposite side of the door.
3. Push the hole plugs into place on the opposite side of
the door.
4. Plug in ice maker or reconnect power.