3. Secure the keyboard by tightening the screws from the bottom side of the computer.
1090 Palm rest assembly, power-on board assembly (with cable), and
microphone
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 54
•
"1020 Bottom door" on page 55
•
"1030 Hard disk drive (HDD)" on page 58
•
"1080 Keyboard" on page 64
Removal steps of palm rest assembly, power-on board assembly (with cable), and microphone
Note: The power-on board assembly (with cable) and the microphone are attached to the palm rest assembly.
Step
Screw (quantity)
1
M2 × 7 mm, wafer-head, nylon-coated (2)
For ThinkPad X100e
1
Color
Silver
1
Torque
0.181 Nm
(1.85 kgfcm)
.
Chapter 8
Removing and replacing a FRU
67