Oki proColor pro900DP Series Manual page 8

- Once the wedge is set-up, the 2" stack of media can remain in place
for the initial feed test.
I n f o r m a t i o n
I n f o r m a t i o n
If the wedge is too far back, there will be a greater tendency to
double feed media.
If the wedge is too far forward there will be a tendency to not feed.
Next Step: Pre-setting the side guides (discharge area)
______________________________________________________________________________________
Pro900DP Set-Up and Print Overview
f o r I n i t i a l F e e d T e
f o r I n i t i a l F e e d T e
s t :
s t :
7