Media Settings - Oki C9600n Manual

Media Settings

This table shows the printer driver settings to use for each type of media. To optimize results, it is important
that the correct paper tray, feed and output orientation, and media type is selected.
• Place media face-up in the MP Tray and face-down in Tray 1.
• When using the Multi-Purpose Tray, the paper size/orientation must match the media size and
orientation settings in the printer menu. (See the User's Guide for printer menu settings.)
• Be sure to disable Media Check and Tray Switch in the printer driver before printing.
Paper dust can damage the printer and shorten the life of consumables. Periodically check for paper dust
buildup on the MP Tray rollers and clean the printer as necessary (see page 13).
Media Input Tray
White Card Stock Tray 1
Up to 80 lb.
cover (218 gsm)
White Card Stock MP Tray
Up to 100 lb.
cover (270 gsm)
10 PT Glossy MP Tray
Paper
or
Tray 1
Capacity Input
Orientation
Max fill to Long
black line Edge
on label
(See
illustration
on right.)
30 sheets Long
Edge
max
30 sheets Long
max Edge
Max fill to Long
black line
Edge
on label
(See
illustration
on right.)
NOTE
Output Bin/ Media Type
Orientation Setting
Face-up or Cardstock up
Face-down to 80 lb.
(Ultra Heavy 2)
Face-up Cardstock up
to 80 - 100 lb.
(Ultra Heavy 3)
Face-up Ultra Heavy 2
Face-up Ultra Heavy 2
6
Special Conditions/Cautions
Make sure to open the printer's
face-up stacker door when
"Stacker face-up" is selected.
(See illustration below.)
Make sure to open the printer's
face-up stacker door.
Make sure to open the printer's
face-up stacker door when
"Stacker face-up" is selected.
(See illustration above.)