Oki C9300 User Manual page 58

Item
ZERO
CHARACTER
LINE PITCH
WHITE PAGE
SKIP
CR FUNCTION
LINE LENGTH
FORM LENGTH
TOF POSITION
LEFT MARGIN
FIT TO LETTER
TEXT HEIGHT
CONT PAPER
MODE
FX emulation (continued)
The default settings are bold.
Value
Normal; Slashed
6 LPI; 8 LPI
OFF; ON
CR; CR+LF
80 COLUMN; 136
COLUMN
11 inch; 11.7 inch;
12 inch
0.0 1.0 inch in 0.01-inch
to
increments
0.0 1.0 inch in 0.01-inch
to
increments
Disable; Enable
Same; Diff
Off; On
C9300/C9500 Setting up • 56
Description
Sets the zero to be slashed or
unslashed.
Specifies the line spacing.
Specifies whether or not the
printer ejects a blank sheet.
Not available with duplex
operation.
Sets functionality on receipt of
CR code.
Specifies the number of
characters per line.
Specifies the length of paper.
Specifies the distance of print
from the top edge of the paper.
Specifies the distance of print
from the left hand edge of the
paper.
Sets the printing mode that can
fit print data, equivalent to 11
inches (66 lines), in the
LETTER-size printable area.
Sets the height of a character.
SAME: Regardless of CPI, same
height.
DIFF: As CPI, character heights
vary.
Sets edit direction of paper to
landscape.