Oki C9300 User Manual page 107

4. The document can then be printed or deleted using the
procedures given below.
Printing copies
MENU
0
ON LINE ON LINE
4
1. Press the MENU button to access the
press the SELECT button.
2. Enter the personal ID number you selected above using the
buttons on the printer control panel.
3. Press the VALUE button until
is displayed.
4. Press the SELECT button to print the document.
Deleting the stored job from the hard disk drive
1. Press the MENU button to access the
press the SELECT button.
2. Enter the personal ID number you selected above using the
buttons on the printer control panel.
3. Press the VALUE button until
is displayed.
4. Press the CANCEL button to delete the remaining copies of the
document.
5. When the deletion confirmation message appears, confirm by
pressing the SELECT button.
Run Maintenance Cycle Before Printing
This option allows you to improve your print quality if you suspect
there is a problem with printing, such as too much graininess in the
print.
1. Select Run Maintenance Cycle Before Printing
printer to automatically clean itself before printing.
ITEM VALUE SELECT
1 2
5 6
ALL JOBS
ALL JOBS
Mac OS 8.6-9.2.2 Operation • 105
3
CANCEL
7
PRINT JOBS MENU
or the required job name
PRINT JOBS MENU
or the required job name
and
and
to force the