Oki C9300 User Manual page 50

System configuration menu (continued)
Item
USB
PS-PROTOCOL
NETWORK
PS PROTOCOL
CLEARABLE
WARNING
AUTO
CONTINUE
MANUAL
TIMEOUT
WAIT TIMEOUT
LOW TONER
The default settings are
Value
ASCII
RAW
ASCII
RAW
ON
; Job
On; Off
60 sec; 30 sec; Off
Off; 5 sec to 300
sec; default = 40
sec
Continue; Stop
C9300/C9500 Setting up • 48
bold
.
Description
Specifies PostScript (PS)
communication protocol mode
of data from USB. (In RAW
mode, Ctrl-T is invalid.)
Specifies PS communication
protocol mode of data from
OkiLAN 6200e Plus.
(In RAW mode, Ctrl-T is invalid.)
PCL emulation: Sets the time
before deleting error messages.
If On, press Error Delete switch
to display error. If Job, error
remains displayed until next
print job is received.
PS emulation: Error messages
are only shown during job
regardless of setting.
Sets the printer to recover
automatically after a memory
overflow or print overrun.
Sets the time between
requesting that paper is inserted
and when the print job is
cancelled should paper not be
inserted.
Only works in PostScript mode.
Sets the time between receiving
the last byte of data and the
page being automatically
ejected.
Only works in PCL mode.
In PS mode the job will be
cancelled.
If set to CONTINUE, allows
printing to continue when Low
toner is displayed. If STOP is
selected - when Low toner is
displayed, the printer goes off
line.