SNTP Tab
Not all utilities, features or protocols are
supported by every product. See the front cover
of this manual for a listing of the items
supported by your product.
In this Tab, you can configure SNTP related items
Item
Comments
Use SNTP
Enable/disable SNTP (Simple Network Time Protocol).
NTP
Set the IP address or host name for NTP Server 1.
Server 1
Address
NTP
Set the IP address or host name for NTP Server 2.
Server 2
Address
Adjust
Set the interval for sending time update requests to the
Interval
server. Select 1 hour (the default), 12 hours or 24 hours.
Local Time
Set the local time zone from -12:00 to +13:00. Minute
Zone
interval is selectable from 00 (the default), 15, 30 or 45.
Daylight
When this is selected, one hour is added to the local time.
Saving
Explanation of SNTP Tab Items
Network User's Guide
NOTE
33