HP XP1024 User Manual page 42

Table 14
Manual CLI command mapping (continued)
Command View CLI
XP512/XP48
Modify host
Not supported
group
modify host mode modify host_mode
<portname>,
<hostmode>
modify fibre modify
address fibre_address
<portname>, <
fibreaddress>
modify fibre modify
topology fibre_topology
<portname>, <
fibretopology>
42 CLI migration
Command View CLI Command View AE CLI
XP128/XP1024/
XP10000/XP12000
modify Hdvmcli ModifyPort
host_group serialnum=<array
<portName>, serial number>
<OldHostGrpNickN model=<array type>
ame>, port=<PortID>
<NewHostGrpNickN domain=<hoststorag
ame> edomain id>
nickname=<host
storage domain
nickname>
modify host_mode Note that domain id is
<portName...>,
also required for
<HostGrpNickName
XP512/XP48 arrays.
...>, <HostMode...>
Hdvmcli ModifyPort
serialnum=<array
serial number>
model=<array type>
port=<PortID>
hostmode=<host
mode value>
domain=<hoststorag
edomain id>
modify Hdvmcli ModifyPort
fibre_address serialnum=<array
<portname...>, serial number>
<fibreaddress...> model=<array type>
port=<PortID>
fibreaddr=<fibre
address>
Hdvmcli Hdvmcli ModifyPort
ModifyPort serialnum=<array
serialnum=<array serial number>
serial number> model=<array type>
model=<array port=<PortID>
type> topology=<topology
port=<PortID> value>
topology=<topolo
gy value>
Automatic translation
support by the CLI
Migration Tool
Supported
Partially supported.
In translations for range
commands, the
migration is aborted at
the first occurrence of an
error and the command
appears as an error for
translation in the output
file.
NOTE: For the XP512,
the domain has to be
specified for modify
host mode operations.
You will need to edit the
file to pass the domain
value. Otherwise, the
domain parameter will
show
<***ErrorCode***>
in the output file by the
CLI Migration Tool.
Supported.
In translations for range
commands, the
migration is aborted at
the first occurrence of an
error and the command
appears as an error for
translation in the output
file.
Supported.
In translations for range
commands, the
migration is aborted at
the first occurrence of an
error and the command
appears as an error for
translation in the output
file.