HP XP1024 User Manual page 40

Table 14
Manual CLI command mapping (continued)
Command View CLI
XP512/XP48
create lun create lun
[<portname....>],
<scsiId>,
[<lunId>], <cu>,
[<ldev...>]
A range can be given
for either ports or
lunids and ldevs, but
not both.
Range values have to
be specified within
square brackets [ ]
create host Not supported
group
40 CLI migration
Command View CLI Command View AE CLI
XP128/XP1024/
XP10000/XP12000
create lun For XP512/XP48
<portname...>, arrays
<hostgrpnickname
Hdvmcli AddLUN
...>, <lunid...>,
serialnum=<array
<cu...>, <ldev...>
serial number>
model=<array type>
port=<PortID>
lun=<free lun id>
devnum=<free ldev
id> [scsi=<scsiid>
domain=<hoststorag
edomain id>]
Specify range values For XP128/XP1024/
XP12000/XP10000
without using square
arrays
brackets [ ]
Hdvmcli AddLUN
serialnum=<array
serial number>
model=<array type>
port=<PortID>
domain=<hoststorag
edomain id>
lun=<free lun id>
devnum=<free ldev
id>
[scsi=<scsiid>]
create Hdvmcli
host_group AddHostStorageDoma
<portname...>, in
<hosghrpnickname serialnum=<array
....> serial number>
model=<array type>
port=<PortID>
domain=<hoststorag
edomain id>
[nickname=<host
storage domain
nickname>]
Automatic translation
support by the CLI
Migration Tool
Supported.
In translations for range
commands, the
migration is aborted at
the first occurrence of an
error and the command
appears as an error for
translation in the output
file.
Supported.
In translations for range
commands, the
migration is aborted at
the first occurrence of an
error and the command
appears as an error for
translation in the output
file.