HP Surestore Disk Array 12h - And FC60 Manual page 59

Upgrading NVSRAM Settings and Controller
Firmware
If you are....
Installing a new Storage Array on a
Windows 2000 host.
Adding a new Storage Array to a system
that includes a Storage Array currently
being managed using SM60-NT. The new
array uses firmware 4.00.02, which is
incompatible with SM60-NT.
Upgrading your operating system from
Windows NT 4.0 to Windows 2000. This
requires you to upgrade from SM60-NT to
SM60.
You will have to....
Upgrade the Storage Array controller with Windows
2000 NVSRAM settings. A new Storage Array is
shipped with Windows NT NVSRAM settings,
which are incompatible with Windows 2000.
The controller firmware (4.00.02) is common to
both NT and 2000, so it does not have to be
upgraded.
Upgrade the controller firmware on any existing
Storage Arrays to version 4.00.02, and upgrade the
NVSRAM settings to the appropriate version (NT or
2000).
Upgrade the controller firmware on any existing
Storage Arrays to version 4.00.02, and upgrade the
NVSRAM settings to Windows 2000.
59