Understanding Display Window Messages; Messages During Operator Selections - HP Surestore 80ex - Optical Jukebox User Manual

NOTE
Operating the Jukebox

Understanding Display Window Messages

Understanding Display Window Messages
The jukebox displays messages according to your keypresses on the control panel.
One level of messages is to tell you which operation you have selected, another level
is to give you feedback to which options you are selecting under each operation.
Messages are also displayed that tell about operations that the host computer has
initiated.

Messages During Operator Selections

The display window shows you the operations you may select. A description of
each operation is given below. Instructions for using and setting operations are
given in the following sections. (See the note below.
- the jukebox is ready for operation
READY
LOAD * - select to load disks through the mailslot
EJECT * - select to eject disks through the mailslot
TEST * - select to run internal jukebox tests (tests are for service only
CONF * - select to customize the way the jukebox functions
(CONFigurations)
INFO * - select to retrieve performance information
SCSI ID * - select to set the SCSI IDs for the jukebox controller
and the optical drive mechanisms.
An "*" indicates there are options that must be set with that operation. The next
section explains how to use these operations.
Pressing one or two times brings the jukebox back to the READY display.
CANCEL
3-6 Chapter 3