Connecting The Jukebox As The Only Peripheral; Figure 1-4 Connecting The Jukebox As The Only Peripheral - HP Surestore 80ex - Optical Jukebox User Manual

Connecting the Jukebox as the Only Peripheral

Figure 1-4 Connecting the Jukebox as the Only Peripheral
The default IDs for the jukebox are as follows:
Jukebox = 3
Drive 1 = 4
Drive 2 = 5 (if installed)
1. Ensure that the mailslot shipping bracket and the shipping screw are removed.
2. Ensure that your host computer and your jukebox are OFF.
3. Connect a SCSI cable between one of the SCSI ports on the jukebox with a SCSI
4. Plug a terminator into the unused SCSI port on the jukebox.
Chapter 1
Connecting the Jukebox as the Only Peripheral
The jukebox power switch is OFF when the switch is raised (out).
port on your host computer (see "4" or "5" on Figure 1-1).
Because this configuration makes the jukebox the last peripheral on the SCSI
bus, the bus must be terminated on the jukebox. The jukebox ships with a
terminator plugged into one of its SCSI ports for your use.
Setting up the Jukebox
1-9