HP Surestore 6164 - Switch Reference Manual page 50

50
18.Install the switch door:
a. Rotate the knobs on the switch door so that they are in the down
position and the springs are compressed.
b. Position the door so that the hinge pins are between the loops on the
hinge plates mounted on the switch (see
When you rotate the door to the closed position, the
Note
spring-loaded hinge pins will snap into the loops on the hinge plates.
Figure 21. Installing the Switch Door
To ensure that the switch does not emit RFI, the switch door must
Note
be installed, and it must be kept closed during normal operation.
HP Surestore FC Switch 6164 Installation and Reference Guide
Figure 15 and Figure 21).