HP StoreOnce B6000 Series Manual page 36

Figure 14 Reverse replication scenario
New host server and StoreOnce Backup System hardware has been purchased and installed
and the administrator now wants to recover data to the StoreOnce Backup System and then
restore to the host server. Before the failure a mapping existed between a Source Share or
Library on the remote site StoreOnce Backup System and a Target Share or Library on the
Data Center StoreOnce Backup System. After the failure the Source Share or Library is missing;
the mapping may or may not still exist,
When the source appliance and host servers are lost and both are replaced, the Recovery
wizard can be used to repopulate a replacement source appliance.
NOTE:
Backup System. This would be a USB disk if you are recovering to a NAS share.
2. Target Promotion
Figure 15 Target promotion scenario
The target is accessed over the WAN using NAS (or iSCSI for G2 and G1 products)
In this recovery model, new server hardware has been purchased and installed and the
administrator now wants to recover data to the server. The administrator however has
36 Replication
This option can use reverse seeding to speed up data recovery to the StoreOnce