Supported Topologies - Brocade Communications Systems StoreFabric SN6500B Troubleshooting Manual

Supported topologies

The following supported topologies illustrate at a high level how D_Port functionality can be used:
•
•
•
•
NOTE
In all of these topologies, both automatic and manual D_Port configuration and test modes are
supported. HBAs also support dynamic D_Port mode. For test output examples, see
scenarios and output"
Topology 1: ISLs
Figure 4
E_Ports to be configured as D_Ports. The following equipment is supported, in any mix-or-match
combination:
•
FIGURE 4
For configuration details see
Topology 2: ICLs
Figure 5
be configured as D_Ports. The following equipment is supported, in any mix-or-match combination:
•
Fabric OS Troubleshooting and Diagnostics Guide
53-1002751-01
Diagnostic Port (D_Port)
"Topology 1: ISLs" on page 93
"Topology 2: ICLs" on page 93
"Topology 3: Access Gateways"
"Topology 4: HBA to switch"
on page 100.
illustrates ISLs that connect multiple switches through a pair of chassis. E represents
Switches: Brocade DCX 8510-4, DCX 8510-8, 6505, 6510, 6520
ISLs connecting multiple switches and chassis
"Using D_Port without HBAs"
illustrates ICLs between slots 5 and 8 in corresponding chassis. E represents E_Ports to
Chassis: Brocade DCX 8510-8, DCX 8510-4
on page 94
on page 95
on page 95.
10
"Example test
93