Scanning In Basic Mode - Canon PIXMA MX392 Online Manual

Scanning in Basic Mode

Use the Basic Mode tab to scan easily by following the on-screen steps.
See "Scanning Multiple Documents at One Time with ScanGear (Scanner
documents at one time from the Platen.
When scanning from the ADF (Auto Document Feeder), documents are scanned without preview.
Important
The following types of documents may not be scanned correctly. In that case, click
on the Toolbar to switch to whole image view and scan.
Photos that have a whitish background
Documents printed on white paper, hand-written text, business cards, etc.
Thin documents
Thick documents
The following types of documents may not be scanned correctly.
Documents smaller than 1.2 inches (3 cm) square
Photos that have been cut to various shapes
Note
When using a model equipped with Auto Duplex ADF, you can scan both sides of the documents
automatically from the ADF.
1. Place the document on the Platen or ADF, then start ScanGear (scanner driver).
Placing Items (When Scanning from a Computer)
Starting ScanGear (Scanner Driver)
2. Set Select Source according to the document placed on the Platen or ADF.
Important
Some applications do not support continuous scanning from the ADF. For details, refer to the
application's manual.
Note
To scan magazines containing many color photos, select Magazine (Color).
When using a model equipped with Auto Duplex ADF, you can specify how to output the paper
upon scanning both sides from the ADF in ADF Duplex Paper Output Settings on the Scan tab
of the Preferences dialog box.
Driver)" to scan multiple
(Thumbnail)