Charging With Usb; Battery Temperature Protection - LG Clout VX8370 User Manual

1. Connect the USB data cable into
the cableless wall adapter. When
connecting as shown below, the
LG logo on the USB cable
should face toward you.
Cableless Wall Adapter
2. Gently uncover the accessory
charging port, then plug the USB
data cable (as shown below) into
the phone's charger port and the
other end into an electrical
outlet.
NOTICE
Please make sure that the
'B' side faces up before
inserting a charger or
data cable into the
charger port of your
phone.
3. The charge time varies
depending upon the battery
level.

Charging with USB

You can use your computer to
charge your phone. To be able to
charge with the USB cable, you
need to have the necessary USB
Driver installed on your PC first.
Connect one end of the USB cable
to the charging accessory port on
your phone and the other end to a
highpower USB port on your PC
(commonly located on the front
panel of the computer).
NOTE
Low-powered USB ports are not
supported, such as the USB ports
on your keyboard or bus-powered
USB hub. LG USB Driver is
downloadable from the www.lge.com.
Battery Temperature
Protection
If the battery becomes overheated,
the phone will automatically turn
off. When you turn the phone back
on, a message pops up to notify
you that the phone was powered
off for your safety.
Clout
19
TM