LG VN251S User Manual page 109

Tests for SAR are conducted using
standard operating positions
specified by the FCC with the
phone transmitting at its highest
certified power level in all tested
frequency bands. Although SAR is
determined at the highest certified
power level, the actual SAR level of
the phone while operating can be
well below the maximum value.
Because the phone is designed to
operate at multiple power levels to
use only the power required to
reach the network, in general, the
closer you are to a wireless base
station antenna, the lower the
power output.
Before a phone model is available
for sale to the public, it must be
tested and certified to the FCC
that it does not exceed the limit
established by the government-
adopted requirement for safe
exposure. The tests are performed
in positions and locations (e.g., at
the ear and worn on the body) as
required by the FCC for each
model.
The highest SAR value for this
model phone when tested for use
at the ear is 1.25 W/kg and when
worn on the body, as described in
this user guide, is 0.60 W/kg
(body-worn measurements differ
among phone models, depending
upon available accessories and FCC
requirements). While there may be
differences between SAR levels of
various phones and at various
positions, they all meet the
government requirement for safe
exposure.
The FCC has granted an Equipment
Authorization for this model phone
with all reported SAR levels
evaluated as in compliance with the
FCC RF emission guidelines. SAR
information on this model phone is
on file with the FCC and can be
found under the Display Grant
section of
http://www.fcc.gov/oet/fccid after
searching on FCC ID BEJVN251.
Additional information on Specific
Absorption Rates (SAR) can be
found on the Cellular
Telecommunications Industry
Association (CTIA) website at
http://www.ctia.org/.
* In the United States and Canada,
the SAR limit for mobile phones
used by the public is 1.6 watts/kg
107 107