LG VN 251 Quick Start Manual

QUICK START GUIDE LG VN 251 | USERS MANUAL
KEY FUNCTIONS
1. Earpiece Lets you hear the caller and automated
prompts.
2. LCD Screen Displays digital clock, phone status,
and information you choose to display.
3. Volume Keys Use to adjust the Master Volume in
standby mode* and the Earpiece Volume during a
call. Use to adjust font sizes when viewing messages,
entering phone numbers (in standby mode) or browsing
menus (except for the Main menu).
4. Left Soft Key Performs functions shown on the
bottom-left of the display.
5. Accessory/Charger Port Connects the phone to
the battery charger or other compatible accessories.
6. Speakerphone Key Change to speakerphone mode.
7. SEND Key Use make and answer calls/send a message.
8. Hand Strap Hole Allows you to insert a hand strap
so that you can easily carry your phone on yourhand.
9. 3.5 mm Headset Jack Allows you to plug in an optional
headset for convenient, hands-free conversations.
10. microSD™ Slot Accommodates optional
microSDTM cards up to 32GB. The microSD Slot is
located in the battery compartment.
CONTINUED ON BACK
11. Camera Lens Use to take a photo. Keep it clean
for optimal photo quality.
12. OK Key/Directional Key Use to select the function
displayed at the bottom of the LCD between the Left and
Right Soft Key functions. Use the Directional Key to scroll
through the menu items and highlight a specific field or
object by moving up, down, left or right.
13. Right Soft Key Perform functions shown on the
bottom-right of the display.
14. CLR Key/Voice Commands Key Deletes single
spaces or characters with a quick press, but press and
hold to delete the entire word. Also backs out of menus,
one level at a time. You can also use this key to access
Voice Commands (when you are not entering text).
15. PWR/END Key Use to turn the power on/off
and to end a call. Also returns to standby mode.
16. Camera Key Use for quick access to the Camera
function.
17. Alphanumeric Keypad Use to enter numbers and
characters and select menu items.
18. Vibrate Mode Key Use to set Vibrate mode (from
standby mode press and hold for about 3 seconds).