How To View Switch Properties; Viewing Network Properties; Description Of The Network Properties; Switch Properties - HP StorageWorks SN6000 - Fibre Channel Switch User Manual
Hp storageworks simple san connection manager user guide (5697-0267, february 2010)
Hide thumbs
Also See for StorageWorks SN6000 - Fibre Channel Switch:
- Command line interface manual (330 pages) ,
- User manual (114 pages) ,
- Installation and reference manual (94 pages)
Table of Contents
Advertisement
• Firmware Version
• Operational State
Figure 25
Switch Properties
How to view switch properties
To view switch properties:
1.
To access the switch properties, choose one of the following options:
• On the HBA & Switch Management menu, click Get Switch Properties. If there is only one switch in
your SAN, it's properties appear. If there is more than one switch, the Switch Selection dialog box
opens; continue with
• On the content pane's Physical Connection map, right-click the switch icon, and on the shortcut
menu, click Get Switch Properties.
2.
If the Switch Selection dialog box opens, select the switch you want to view.
3.
When you finish viewing the switch properties, click OK to close the dialog box.
Viewing network properties
Simple SAN Connection Manager provides a quick and easy way to view properties related to your
storage area network.
Description of the network properties
The Network Properties
• IPv4 network settings: Enabled, Address, Subnet Mask, and Gateway
• IPv6 network settings: Enabled, Address, Gateway, and Assigned Addresses
• SNMP Enabled
• Broadcast Support Enabled
• DNS Enabled
• Configured Local Hostname (if any)
• Assigned Local Hostname (if any)
52
Managing switches
step
2.
(Figure
26) include the following read-only information:
Advertisement
Table of Contents
