Certificate Management - Lexmark X782 Installation And Configuration Manual
Pki-enabled mfp installation and configuration guide
Hide thumbs
Also See for X782:
- Clearing jams manual (7 pages) ,
- Quick reference (5 pages) ,
- User manual (312 pages)
Table of Contents
Advertisement
Pre-Installation
2. Set the Auto "Log out" delay value.
Section 3.4.1
3. Click Submit.
3.6 Certificate Management
Pre-Installation
Sections 2.5
Certificates are needed for SSL support in LDAP lookups and for Domain Controller
item 3,
3.2.2.1.1, 8.1,
verification. All certificates needed by the device must be in PEM (Base64) format and
8.2, & 8.3
combined into one file. Since the certificates are in PEM format, they can easily be cut-and-
paste into a single file such as:
-----BEGIN CERTIFICATE-----
MIIE1jCCA76gAwIBAgIQY6sV0KL3tIhBtlr4gHG85zANBgkqhkiG9w0BAQUFADBs
...
l3DTbPe0mnIbTq0iWqKEaVne1vvaDt52iSpEQyevwgUcHD16rFy+sOnCaQ==
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
MIIE1zCCA7+gAwIBAgIQZWAEBZ+h+L5AKmbyl9hgSzANBgkqhkiG9w0BAQUFADBn
...
l3DTbPe0mnIbTq0iWqKEaVne1vvaDt52iSpEQyevwgUcHD16rFy+sOnCaQ==
-----END CERTIFICATE-----
Version 2.0.0
Page 19
Advertisement
Table of Contents
