Laser Devices; Laser Safety Warnings; Compliance With Cdrh Regulations; Compliance With International Regulations - HP StorageWorks MSA 2/8 - SAN Switch Installation Manual

Laser Devices

All HP systems equipped with a laser device comply with safety standards,
including International Electrotechnical Commission (IEC) 825. With specific
regard to the laser, the equipment complies with laser product performance
standards set by government agencies as a Class 1 laser product. The product does
not emit hazardous light; the beam is totally enclosed during all modes of
customer operation and maintenance.

Laser Safety Warnings

To reduce the risk of exposure to hazardous radiation:

Compliance with CDRH Regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and
Drug Administration implemented regulations for laser products on August 2,
1976. These regulations apply to laser products manufactured from August
1,1976. Compliance is mandatory for products marketed in the United States.

Compliance with International Regulations

All HP systems equipped with laser devices comply with appropriate safety
standards including IEC 825.
MSA SAN Switch 2/8 Installation Guide
Do not try to open the laser device enclosure. There are no user-serviceable
components inside.
Do not operate controls, make adjustments, or perform procedures to the laser
device other than those specified herein.
Allow only HP authorized service technicians to repair the laser device.
Regulatory Compliance Notices
63