System Assigned Switch Names - HP StorageWorks MSA 2/8 - SAN Switch Installation Manual

About the MSA SAN Switch 2/8
Each switch is assigned a system-generated name, dependant on the slot in which
it is installed.
Table 2: System Assigned Switch Names
Note: The first portion of the switch name is the name assigned to the MSA1000
Controller installed in the associated controller slot.
This chapter provides the following information:
14
MSA1000 Sot Location
Primary (rear-left)
Secondary (rear-right)
MSA SAN Switch 2/8 Firmware Features
MSA SAN Switch 2/8 Hardware Features
MSA SAN Switch 2/8 Panel Description
Switch Name
MSA1000 Controller Name
MSA1000 Controller Name
MSA SAN Switch 2/8 Installation Guide
-switch1
-switch2