Dap Modes; All Channel Stereo - JVC TH-V70 Instructions Manual

• DAP (Digital Acoustic Processor) modes • All Channel Stereo
DAP modes have been designed to create important
acoustic surround elements.
The sound heard in a live club, dance club, hall or pavilion
consists of direct sound and indirect sound--early reflections
and reflections from behind. Direct sounds reach the listener
directly without any reflection. On the other hand, indirect
sounds are delayed by the distances of the ceiling and walls
(see the diagram below).
These indirect sounds are important elements of the acoustic
surround effects. The DAP mode can reproduce a realistic
sound field by adding these indirect sounds.
The following DAP modes are provided with this system.
LIVE CLUB: Gives the feeling of a live music club with a
low ceiling.
DANCE CLUB: Gives a throbbing bass beat.
HALL: Gives clear vocal and the feeling of a
concert hall.
PAVILION: Gives the spacious feeling of a pavilion with
a high ceiling.
These DAP modes can be used to add the acoustic surround
effects while reproducing 2 channel stereo software, either
analog or Linear PCM, and can give you a real "being there"
feeling.
• When one of the DAP modes is selected, the DSP indicator
lights up on the display window.
Early reflections
Reflections from behind
Direct sounds
All Channel Stereo (ALL CH ST.) mode can reproduce a
larger stereo sound field using all the connected (and
activated) speakers.
All Channel Stereo can be used while reproducing 2 channel
stereo software, either analog or Linear PCM.
• When All Channel Stereo is selected, the DSP indicator
lights up on the display.
Allchannelstereo
Normal stereosound
_J
• The signal indicators on the display window
Light up to indicate the incoming signals.
m it4 Ir_
L: Lights up when the left channel signal comes in.
C: Lights up when the center channel signal comes in.
R: Lights up when the right channel signal comes in.
LFE: Lights up when the LFE channel signal comes in.
LS: Lights up when the left surround channel signal
comes in.
RS: Lights up when the right surround channel signal
comes in.
S: Lights up when the monaural rear channel signal or 2
channel Dolby Surround signal comes in.
Available Surround modes for each input signal
Mode SURROUND DOLBY DTS
Signals
Dolby Digital
(Multichannel)
Dolby Digital
(2 channel)
DTS Digital
Surround
(Multichannel)
DTS Digital
Surround
(2 channel)
Analog
(AUX/FM/AM)
or
Linear PCM
PLII PLII LIVE DANCE HALL
OFF (stereo) DIGITAL SURROUND MOVIE MUSIC CLUB CLUB
0 0 X X X X X
0 X X 0 0 X X
0
X
X X
0 X
o: Possible / x: Impossible
PAVILION ALL CH
x O O
x
x
x
x
ST.
x
x
34