Answering A Call; Call Waiting - Ericsson T18d User Manual

Ericsson mobile phone user's guide
Hide thumbs Also See for T18d:
Table of Contents

Advertisement

Answering a Call

When your phone
receives a call, the ring
tone sounds (unless you
have disabled it through
the
menu),
the words
play and keypad back light flash, and the indicator light
on top of the phone rapidly flashes green. If you have
Caller Number Identification (Caller ID) service from
your service provider, the caller's phone number is
shown in the display. If the caller's phone number is
stored in the phonebook, the name stored with the
phone number is also shown when the call is received.
1 Open the flip to answer the call. If the flip has been
deactivated in the
the phone by opening the flip and pressing
The words
call timer display.
2 When you finish your conversation, press
close the flip to end the call.
Temporarily Muting the Ring Tone
To temporarily mute the ring tone without answering
the call, press either the upper or lower side key, or if the
flip is open, press
NO.
can still answer the call by opening the flip or by press-
ing
.
YES
24
flash in the display, the dis-
menu, answer
.
YES
are replaced by the
or
NO
is still shown in the display, and you
Note!
Do not use the
key to mute the ringer if the flip is
NO
closed and active. Opening the flip will answer the call.
Pressing
will end the call.
NO
Muting the Microphone During a Call
To mute the microphone during a call, press and hold
the
key.
CLR
appears in the display when the call is
muted. Repeat this procedure to return to your call.
Note!
If your flip has not been set to answer or end the call,
then closing the flip mutes the call, and opening the flip
disables the mute and resumes your call.
Increasing or Decreasing Ear Volume During a Call
To adjust the ear volume during a call:
• Press the upper side key to increase the ear volume.
• Press the lower side key to decrease the ear volume.

Call Waiting

If you have call waiting service from your service pro-
vider, press
to answer a call when you receive the call
YES
waiting signal. You can switch between the two calls by
pressing
.
YES
both calls.
press
until you are ready to end
NO
Basic Operations

Advertisement

Table of Contents
loading

This manual is also suitable for:

T18ds

Table of Contents