Table of Contents
Advertisement
Problems You Can Solve
Displayed Messages and Explanations
The signal is too weak to make a call. Try again
when the signal strength is one bar or stronger.
Your phone is searching for a mobile service pro-
vider.
You called a number for which you have set call
restrictions.
You entered an incorrect security code. Enter the
correct security code.
The battery power is low. The indicator light will
flash red. When the phone shuts itself off, replace
the battery with a fully charged one, or use an alter-
nate power source, such as a travel charger.
Your text message memory is full. Erase some
stored messages to free up memory for new mes-
sages.
Problems You Can Solve
Problems and Possible Solutions
1
Charge or replace the battery.
2
Check the
is not set for
for Phone Silent, check
sure that
particular Phone Group.
3
This is not a problem. Because of its size, the phone
may feel slightly warm during extended calls.
4 The battery does not seem to charge to full capac-
ity.
Condition the battery by fully discharging and
charging it three times. Or, if your phone came with
a desktop charger, use the conditioning function on
the desktop charger to condition the battery.
5
You are probably in a geographic area with minimal
service. Wait until the signal strength indicator in
your phone's display shows a high relative signal
strength (more bars) before trying a call. Make note
of geographic locations where calls are dropped and
contact your service provider.
menu to make sure the phone
. If your phone is not set
to make
has not been selected for a
67
Advertisement
Table of Contents
