Diverting Incoming Calls - Ericsson A1018 User Manual

All calls
< Activate >
42

Diverting Incoming Calls

Diverting Incoming Calls

If you want to make certain that your incoming calls are correctly
handled when you are unable to answer them, you can use the Call
Divert service to divert them to another phone number.
Note! The Call Divert service may not be available in all networks.
The Call Divert service lets you:
• divert calls if you are already on the phone,
• divert calls that you do not answer within a specified time limit
(operator dependent),
• divert calls if your phone is turned off or if you are unreachable,
Unreachabl (e).
You may use any combination of the above.
You may also:
• divert all incoming calls,
an arrow is shown in the display. If you activate the All calls
divert, all other diverts are automatically cancelled. However, they
are activated again when you cancel the All calls divert.
Tip! If you subscribe to the Alternate Line Service (ALS), you can set
different Call Diverts for the two lines, i.e. Line 1 and Line 2.
ACTIVATING CALL DIVERTS
1. Scroll to Divert ,
2. Select the divert you want (
3. Select Activate .
4. Enter the phone number, including the area code, to which you
want your calls to be diverted and then press
Tip! If the phone number is stored in the phone book, you do not need
to enter it. Press
L E F T
Diverting when the Data Menus are On
If you have turned the Data menus on, you can set call diverts for
your phone, data and fax numbers respectively. To divert, proceed as
described above.
For data and fax numbers, there are only two divert alternatives:
•
All calls
No reply .
All calls . A divert indicator in the shape of
.
Y E S
All calls
and then recall the number.
.
On busy
, , or
On busy No reply
.
Y E S
).
Unreachabl