Table of Contents
Advertisement
Connecting
the Camera to a Printer
Connecting
the Camera
to a Printer
1
Close
the slide
cover
to turn
off the camera.
2
Turn
on the printer.
• Check printer settings.
3
Connect
the
camera
to the
printer
using
the
included
USB cable.
• Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle,
and do not use force when connecting
or disconnecting
the plugs.
4
The
camera
is automatically
turned
on.
_
if.
,_1_1
• When properly connected, the PictBridge startup
k,
"_._--_.........._j
screen ((:I) will be displayed in the camera monitor,
followed by the print selection screen (d2")).
R
m
t_
_1_
If the
PictBridge
Startup
Screen
is not
Displayed
Turn the camera
offand
disconnect
the USB cable, Set the Charge
by computer
option
(_'_
92) in
the camera's
setup menu
to Off
and reconnect
the cable again.
_39
Advertisement
Table of Contents
