Table of Contents
Advertisement
Using ViewNX
2
Transferring
Images to the Computer
1
Choose
how
images
will
be copied
to the computer.
Choose one of the following
methods:
• Direct USB connection:
Close the slide cover to turn the camera off and ensure that
the memory card is inserted in the camera. Connect the camera to the computer
using the supplied USB Cable UC E6.The camera automatically
turns on.
m
eJ
• SD card slot: If your computer
is equipped
with an SD card slot, the card can be
inserted directly in the slot.
• SD card reader: Connect a card reader (available separately from third party
suppliers) to the computer and insert the memory card.
Ifa message is displayed prompting
you to choose a program, select Nikon Transfer 2.
• When using Windows
7
If the dialog shown at right is displayed,
follow the steps below to select
Nikon Transfer 2.
1 Under Import pictures and videos,
click Change program. A program
selection diaJog will be displayed; select
Import
File using Nikon Transfer 2 and click OK.
2 Double dkklmport
File.
If the memory card contains a large number of images, it may take a while for
Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.
Connecting
the USB Cable
The connection may not be recognized if the ca mera is connected to the computer via a USBhub.
78
Advertisement
Table of Contents
